PDM 15 Series (Industry Standard)
Phoenix
The standard PDM 15 Series is used in applications with a frequency range of 950 MHz or below. They are available in straight or right angle configurations for both cable and printed circuit mount applications.
Cable terminations include solder, crimp and double crimp for flexible, semi-rigid and conformable cable types. A non-magnetic contact is also available with a residual magnetism of less than 20 Gamma. The PDM 15 series contact can be used in several standard housings, such as D-Subminiature, and in some instances, can be easily adapted for use in other housings such as the MIL-C-81659 rack and panel series or the MIL-C-38999 cylindrical connector.
you must register to view this file (Adobe PDF file)
PDM 15 Series High Power
Phoenix
The PDM 15 Series High Power Contact is offered in current ratings of 10, 20 or 40 amps of power. They are available in straight or right angle configurations for both cable and printed circuit board applications.
Cable terminations include either crimp or solder for 16, 12 or 8 gauge wire. A non-magnetic co0ntact is also available with a residual magnetism of less than 20 Gamma. It is commonly used in conjunction with Phoenix's D-Subminiature combination housing. Applications include power supplies, power amplifiers and various medical instruments.
you must register to view this file (Adobe PDF file)
PDM 15 Series High Voltage
Phoenix
The PDM 15 Series High Power Contact constructed from a nylon material specifically designed to withstand high voltage environments operating up to 1000 volts.
It is available in a solder termination only for either straight or right angle configurations and will accommodate a 20 gauge wire. It is commonly used in conjunction with Phoenix's D-Subminiature combination housing.
you must register to view this file (Adobe PDF file)
PDM 16 Series
Phoenix
The PDM 16 Series Coaxial Contact was designed to better meet the impedance needs of computer and video applications. Operating at 75 ohms, the frequency range of the PDM 16 Series Contact is DC to 2000MHz.
It also has the advantage that it can be mated with the standard PDM 15 Series Contact. It is available in straight or right angle configurations, in either a solder, crimp, or double crimp (solderless) termination for RG179 cable and is commonly used in conjunction with Phoenix's D-Subminiature combination housing.
you must register to view this file (Adobe PDF file)
PDM 24 Series
Phoenix
The PDM 24 Series, 50 ohm Coaxial Contact offers improved electrical performance by matching typical RF systems characteristic impedance and exhibiting a lower return loss.
The PDM 24 Series can be used to 1500 MHz while maintaining a matched impedance of 50 ohms. They are available in straight and right angle configurations for both cable and printed circuit mount applications. Cable terminations include solder, crimp, and double crimp 9solderless) for flexible, semi-rigid and conformable cable types and they are commonly used in conjunction with Phoenix's D-Subminiature combination housing. A non-magnetic contact is also available with a residual magnetism of less than 20 gamma.
Typical applications include cellular, wireless, and medical equipment.
you must register to view this file (Adobe PDF file)
DIN 28 Series
Phoenix
The DIN 28 Series Coaxial Contac was designed to meet all the requirements of the DIN 41626/2 specification and for use with the DIN 41612 housing.
Its operating frequency ranges from DC to 10 GHz and it is available in straight and right angle configurations for both cable and printed circuit board requirements. Cable terminations include solder or crimp for flexible, semi-rigid and low loss cable.
you must register to view this file (Adobe PDF file)
DIN 28 Series High Power
Phoenix
The DIN 28 Series High Power Coaxial Contact is designed to meet all the requirements of the DIN 41626 specification and for use with the DIN 41612 housing.
Offered in current ratings of 10, 20 or 40 amps of power, it is available in straight and right angle configurations, with either solder or crimp termination for cable and printed circuit board applications.
you must register to view this file (Adobe PDF file)
DIN 28 Series High Voltage
Phoenix
The DIN 28 Series High Voltage Coaxial Contact is designed to meet all the requirements of the DIN 41626 specification and for use with the DIN 41612 housing.
It is constructed from a nylon material and is specifically manufactured to withstand high voltage environments operating up to 2,8000 volts. It is available in a solder termination only, in either a straight or right angle configuration and will accommodate 20 gauge wire.
you must register to view this file (Adobe PDF file)
Stamped & Formed
Phoenix
Phoenix offers a printed circuit mount, stamped and formed coaxial contact for use with Phoenix's combination D-Subminiature connectors. These parts are available with a nominal impedance of 50 or 75 ohms and a frequency range of DC to 2 GHz.
The Stamped & Formed Contact offers the high volume user a lower price and a quicker turnaround which makes the stamped and formed contact a good alternative to a machined contact. Key applications include computer workstations, cellular radio and video applications.
Double Crimp
Phoenix
Phoenix Double Crimp Size 8 Contacts are offered in standard 50 & 75 ohm versions, as solderless, cost effective alternatives for high volume manufacturing needs.
The Double Crimp Contact design consists of a one-piece body, a separate snap fit, centre contact and an outer ferrule. Both centre contact and outer ferrule can be terminated with a high speed crimping operation or conventional hand-held tool. The Double Crimp Contacts can be mated to "industry standard" equivalent D-Subminiature coaxial contact varieties.
  UK Specilaty    

  
chess_specialty.gif
    http://specialty.bfioptilas.co.uk/
    >Advanced Connectors/Contacts/Coaxial Contacts/Size 8