Test & Burn-In Sockets by BFi OPTiLAS - Test And Burn-In Sockets

776P Series - 0.50mm Open Top QFN/MLF Socket

Wells CTI

Wells-CTI Open Top QFN/MLF, 0.5mm Pitch, Buckle Beam Contact with Single Point Rounded Tip.

Wells-CTI Open Top QFN/MLF, 0.5mm Pitch, Buckle Beam Contact with Single Point Rounded Tip.

Smallest Open Top QFN socket outline in the industry
Robust design built for auto-loading
Proven contact design - tip modified to accommodate land pads
High performance / low cost achieved through use of carrier loaded stamped contact
Low actuation force

Wells CTI

776P Series - 0.50mm Open Top QFN/MLF Socket

680 Series - 1.00 & 0.65mm Open top QFP Socket

Wells CTI

Wells-CTI Open Top 1.00 & 0.65mm pitch QFP Socket, Single Beam Contact.

Wells-CTI Open Top 1.00 & 0.65mm pitch QFP Socket, Single Beam Contact.

Open top, zero insertion force design for automatic loading
Compact outline for maximum board density
Highly reliable dual beam contact design, "H" version
Lid actuation force peaks during stroke and drops off at full deflection for ease of use.

Wells CTI

680 Series - 1.00 & 0.65mm Open top QFP Socket

3000 Series - 0.50 & 0.65mm Open Top QFP Socket

Wells CTI

Wells-CTI Open Top 0.50& 0.65mm pitch QFP Socket, Reduced Lid Activation Force, Single Beam Contact

Wells-CTI Open Top 0.50& 0.65mm pitch QFP Socket, Reduced Lid Activation Force, Single Beam Contact

Open Top Quad Flatpack & Thin Quad Flatpack package
Reduced actuation force contact design
Zero insertion force for auto load
For 0.5mm pitch and higher, corner post alignment feature accommodates JEDEC package dimensions
Modular tooling provides maximum flexibility to meet most lead form and pin count combinations.

Wells CTI

3000 Series - 0.50 & 0.65mm Open Top QFP Socket

7000 Series - Open Top QFP Socket

Wells CTI

Wells-CTI Open Top 0.5 - 0.80mm pitch QFP Socket, Single Beam Contact.

Wells-CTI Open Top 0.5 - 0.80mm pitch QFP Socket, Single Beam Contact.

Open Top Quad Flatpack & Thin Quad Flatpack package
Zero insertion force for auto load
High normal force scrubbing contacts
For 0.5mm pitch and higher, corner post alignment feature accommodates JEDEC package dimensions
Modular tooling provides maximum flexibility to meet most lead form and pin count combinations.

Wells CTI

7000 Series - Open Top QFP Socket

564 Series - 0.65mm Clamshell MCR Socket

Wells CTI

Wells-CTI 0.65mm pitch Clamshell MCR Single Beam Socket

Wells-CTI 0.65mm pitch Clamshell MCR Single Beam Socket

Normally closed contacts allow for maximum wiping action at point of contact
Package damage is averted with the use of a gimbled pressure plate incorporated in the socket lid
Support rings in both socket base and lid eliminate possibility for damaged test pads
Spring loaded stripper plate always presents the package for easy removal
High normal force, low contact resistance
Low impedance contact design
85°C / 85% RH compatible

Wells CTI

564 Series - 0.65mm Clamshell MCR Socket

690 Series - 0.80mm Open top QFP Socket

Wells CTI

Wells-CTI Open Top 0.80mm pitch QFP Socket, Double Beam Contact.

Wells-CTI Open Top 0.80mm pitch QFP Socket, Double Beam Contact.

Wells CTI

690 Series - 0.80mm Open top QFP Socket